Overview

The Overlapping Panel system comprises of an economical kit of panels and flashings that can be easily installed on either timber battens or metal cladding rails. The system is fixed with screws or with a nail gun resulting in the panels being held in place with no visible fasteners. They are installed horizontally.

Structure

The overlapping panels are installed on vertical cladding rails at 600mm centres. The rails can be either softwood timber with a 50mm supporting width or 40mm wide metal rails (2mm thick Aluminium or 1.5mm thick galvanised steel). A vented air space of at least 38mm must be allowed for behind the panels.


Areas of application

Suitable for both renovation projects and new buildings - All types of buildings : commercial, public buildings, collective and individual housing.


Dimensions

Panel size200 x 3000 mm
Panel width200 mm
Panel depth13 mm
Finishes

Zinc PLUS must be used on all non-vertical flashings if open gap soft boards are not being used.

  • ANTHRA-ZINC
  • AZENGAR
  • PIGMENTO Blue
  • PIGMENTO Brown
  • PIGMENTO Green
  • PIGMENTO Red
  • QUARTZ-ZINC

Documents and drawings

  • In a sequential order the panels are installed from bottom to top and fixed with a nail gun for timber supports and screwed into position when using metal cladding rails. The panels should be installed with the protective film in place. A full set of standard flashing trim is available for base, top, corners and windows.

Do you have a question or remark? Please, leave us a message.
;

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

;