Flat lock panel
- Facade
- Clips
- Hidden
- Reveal
- Flat lock panel
- Horizontal or vertical installation
- • Recessed and non recessed joint allowing 2 different aesthetics
General information
Flatlock panel can be installed aligned or staggered and both horizontally and vertically or even at an angle. The panels should be installed on a vertical wall or soffit. The façade system involves laying the panels on a compatible wooden framework or plywood fixed to the supporting structure (masonry or metal structure).
Panels can be square, rectangular or diamond shaped. The panels interlock into each other on the four sides and are secured with concealed fasteners and clips.
Technical data
| Thickness | 0.7 mm & 0.8 mm |
| Standard Center to Center | 390 mm for non recessed joint |
| Maximum Length of Panel | 3 meters |
| Support System | Rigid and continuous in all parts |
Finishes
See all aspects-
ANTHRA-ZINC -
AZENGAR -
PIGMENTO Blue -
PIGMENTO Brown -
PIGMENTO Green -
PIGMENTO Red -
QUARTZ-ZINC
Installation
See all our installation videos-
The panels can be installed horizontally or vertically. The choice of direction implies different aesthetic and technical solutions for the main flashings.
A range of standard accessories has been designed, including: External and internal corners, top and bottom pieces, window lintels, etc...