General information

VMZINC Overlapping panel is a wall-mounted cladding system made up of horizontal overlapping panels fixed to the substructure using brackets. The system is designed to be compatible with external insulation.
The panels fit easily into each other, making them quick and easy to install.

Technical data

0.70 mm
Dimension of the panel (L c H)3,000 x 200 mm
13 mm 
Weight per unit4.56 kg
Number of panels / m21.66 (i.e. 5 for 3 m2)
Number of splice plates per m21.67
Number of screws per m210
  • PIGMENTO Brown
  • PIGMENTO Green
  • In a sequential order the panels are installed from bottom to top and fixed with a nail gun for timber supports and screwed into position when using metal cladding rails. The panels should be installed with the protective film in place. A full set of standard flashing trim is available for base, top, corners and windows.

  • 1 -

    Installation of the framework is prepared by marking out (laser or tracing line) and must correspond to the layout plan provided by the architect. Once the vertical tracing is done, the brackets are fixed.
    The centre distance between rafters must not exceed 600 mm on the main building.

  • Etape2Clin.jpg

    2 -

    Mineral wool insulation is installed directly onto the substructure.

    Rafters are then fixed on brackets.

  • Etape3Clin.jpg

    3 -

    Start installing Overlapping panel by installing a perforated base trim to create the entry of the air gap. It is important to ensure the base trim is horizontally aligned because it determines the correct position of the first row of panels

  • Etape4Clin.jpg

    4 -

    The panels are installed from bottom to top and fit into each other easily with a clicking movement. The panels are fixed onto each rafter using screws or nails.

  • Etape5Clin.jpg

    5 -

    The panels must be handled with care on the trenching knife to avoid deformation.

  • Etape6Clin.jpg

    6 -

    For transverse junctions, a trim splice plate is placed behind one end of the panel.

  • Etape7Clin.jpg

    7 -

    The film must be removed quickly in a single movement after completion of installation.

  • 8 -

    A range of universal zinc accessories is available and makes working on flashings easy.


Do you have a question or remark? Please, leave us a message.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.