ADEKA
- Facade
- Screws
- Hidden
- Overlapping
- ADEKA
- Aesthetic of diamond shaped
- Fast and easy installation making it a cost effective solution
- Small preformed elements
.jpg?width=1120)
.jpg?width=1120)
.jpg?width=1120)
General information
ADEKA is an innovative patented facade system based on small pre-formed QUARTZ-ZINC or ANTHRA-ZINC elements featuring a unique locking key (other finishes on request).
Areas of application
Suitable for both renovation projects and new buildings.
All types of buildings: commercial, public buildings, collective and individual housing
Technical data
| Material Thickness | 0.65mm (0.0256") |
| Panel Dimensions | 15.5" x 15.5" (393.7mm x 393.7mm) |
| On Center | Vertical 16 1/16" (408mm) Horizontal 22 1/16" (560mm) |
Coverage per Panel | 1.22 SF |
| Panels per Box | 24 panels |
| Coverage per Box | 29.28 SF |
| Weight per Panel | 1.7 lbs |
| Weight per Box | 42 lbs |
Finishes
See all aspects-
ANTHRA-ZINC -
AZENGAR -
PIGMENTO Blue -
PIGMENTO Brown -
PIGMENTO Green -
PIGMENTO Red -
QUARTZ-ZINC
Documents and drawings
Please enter your E-mail address. We will send you the download link by mail.
Installation
See all our installation videosDescription
The panels are installed from bottom up with the key fixing into the lower panel. Each Adeka tile is then secured with 3 screws. Adeka is not supplied with filmed VMZINC.
-
1.
The support must be: Rigid and continuous, Rest on at least 3 bearing structure elements, Have no protruding elements on the support
-
2.
ADEKA is laid on 19mm plywood and a separation membrane (i.e. tyvek) should be laid before installing the panel. For 20° - 30° (36% - 60%) roofs use a continuous deck. For roofs steeper than 30° (60%) or facades, ADEKA can be laid on battens with 203 mm centre-to-centre span. The support must be continuous for 40 cm adjacent to special features such as corner or bottom flashing.
-
3.
Mark out lines on the deck every 56 cm (or 28 cm) at right angles to the baseline. These will be used to line the ADEKA elements up with the alignment guide on each element.
-
4.
Begin laying from the eaves up, folding the locking key under the fold of the eaves flashing.
-
5.
Insert the ADEKA element via the locking key into the appropriate grooves made in the lower elements. Then fix each ADEKA onto the wooden deck in the predrilled holes.