| VM ZINC® Structural roof |
|
Construction system combining a standing seam roofing in VM ZINC PLUS with rigid mineral wool insulation laid on supporting structures in steel, wood or concrete.
Key advantages
 |
Modular warm roof system for any type of deck (steel sheets, wood, concrete). |
|
Suitable for low to high hygrometry. |
|
Exclusive patented VM ZINC® fixing system. |
|
Competitive cost of complex. |
Areas of application
Warm roof for buildings with low to high hygrometry.
Warm roof for tropical countries (high exterior hygrometry).
Main components
|
VM ZINC® roofing |
| Packaging |
Small coils for profiling or preformed strips
on request |
| Surface aspects |
QUARTZ-ZINC PLUS |
| Thickness |
0.70 mm |
| Stretchout width |
500 mm |
Finished centre-to-centre
Width |
430 mm |
| Protective paint |
60 microns on the underside
(lacquering process on the inside surface)
|
|
Fixing (accessories supplied by VM ZINC®)
| . |
VM ZINC® profile 1 fixing clip. |
| . |
Rigid plastic spacer (for fixed section only), with variable length according to the thickness of the insulation.
Single fixed standing seam sliding clip with a 6 mm screw hole. |
| . |
Load distribution plate (for the sliding section) with a spoonful, a positioning mark for the clip and 3 and three claws on either side to anchor the plate in the insulation. |
| . |
Specific screws for the steel panel support: 4.8 mm diameter, flat countersunk head and reduced diameter tip. |
|
|
Components (not supplied by VM ZINC®)
|
|
. Breathable separation membrane, |
|
. Insulation, |
|
. Vapour barrier, |
|
. Roof deck: steel panel, wood, concrete. |
|
Accessories (supplied by VM ZINC®)
Unventilated eaves flashing (thickness 0.65 mm, length 2 m, delivered with 4 galvanised steel stiffeners).
|
|
|
|
